McCallum's drone extenders fit in your drone top to lengthen the drone and lower the pitch. When they're paired with your B Flat pipe chanter, you'll be set up to play your pipes in B Flat, or at 466 Hz. With the extenders in, you may need to move the bridle ever so slightly to open the tongue. The extenders fit McCallum, MacRae, and Naill drones. Set of 3 Drone Extenders.

                  

For optimum harmonics, some traditionalists prefer cane drone reeds, but keeping the reed performance-ready can be challenging. The Tone Protector for tenor drones keeps your cane tenor reed protected, humidified, and ready to play. For a set, you'll need to order 2 Tenor Protectors. The digital display on the Tone Protector shows temperature and humidity readings, allowing you to see the results and and know when to replace the 2-way humidification packet. To install the packet, squeeze the soft rubber body of the Tone Protector and remove the digital cap. Then, fold and wrap the 2-way packet in the interior channel. Packets will last longer in moist climates and when the pipes are played frequently. Designed by Jori Chisholm of Bagpipelessons.com.

This tube of waterproof lubricant can be used on pipe bag zippers, like those on the Bannatyne, Canmore, and Ross pipe bags. It's important to keep these zippers lubricated so they function smoothly and seal properly. Apply the lubricant to the locking end of the zipper. Then slide the zipper back and forth to lubricate the teeth.

 

This set of EzeeDrone Reeds includes 2 long tenors and a long bass reed for an overall lower pitch. Low-pitch reeds are needed for drones that tune too high. They are also helpful when you play with a lower-pitched specialty pipe chanter, like a 466 B Flat or 440 A pipe chanter. EzeeDrone Reeds have an established reputation for consitency and ease of use, along with a rich tone and wonderful harmonics. Made in Scotland, the reeds must pass rigorous quality control standards. For ease in setup, the reeds are preadjusted. Instructions for proper installation and manipulation are included.

 

Premium Red Hot Chilli Pipers Deluxe Grip Bag Cover Get the look of the most iconic bagrockers with this authentic Chilli Pipers bag cover! The cover is authorized by the Red Hot Chilli Pipers, with the same design and endorser logos.  A body-side gripper patch helps keep the pipes from sliding while you're playing.  A bottom zipper gives quick access to your pipe bag. Plus, it makes this cover simple to put on and take off, so you can change back to your band cover easily. The back closes with Velcro, for a fitted and contemporary look. Made in the UK.

• Deluxe black velvet fabric
• Red stock collars and trim
• Red and white velvet rays
• Bagpipecovers.com Skeleton, Chilli Pipers, and Wallace embroidered logos
• Rectangular 9" x 6" body-side rubber grip patch
• Patch stitched securely on
• Velcro rear closure
• Long bottom zipper